Connecting Other Equipment - JVC CA-MXS6MDR Instructions Manual

Connecting Other Equipment

You can connect the following equipment to this unit:
• Cassette deck — used as a playback and recording
device. By using the cassette deck, you can record any
source played back on this unit.
• Portable MD player — used as a playback device.
• Audio equipment with an optical digital output terminal
— used only as a digital playback device.
When you connect and use these equipment, refer also to
the manuals supplied with them.
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect another component such as a cassette
deck
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color-coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
SPEAKERS
To input (REC)
To output (PLAY)
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
the LINE 1 OUT jacks — For recording on the cassette
deck.
• Between the audio output jacks on the cassette deck and
the LINE 1 IN jacks — For playing a tape.
RIGHT LEFT
CAUTION:
SPEAKER IMPEDENCE 6 16
Ex. cassette deck
To connect a portable MD player with a mini output
jack
MENU
SP/LP2/LP4
LONG REC
MODE MODE
REC PAUSE
HIGH SPEED
CD MD
MD player
By using a cable with the stereo mini-jack, connect
between the stereo mini-jack on the other equipment and
the LINE 2 jack on the front panel.
To connect audio equipment with an optical digital
output terminal
Before connecting the other equipment,
remove the protective cap from the terminal.
To optical digital
output
Connect between the optical digital output terminal on the
other equipment and the DIGITAL IN terminal.
– 8 –
Continued
DISC
DISC LOADING MECHANISM
TITLE/EDIT ENTER
/DEMO
PHONES LINE 2
To output (mini-jack)
RIGHT LEFT
SPEAKERS
CAUTION:
SPEAKER IMPEDENCE 6 16
Protective cap
Audio equipment with an
optical digital output