Curtis IntelliFresh G4 GEMX User Manual page 42

Troubleshooting guide | Troubleshooting Guidelines
Dispenser Not Filled To Normal Level During Brewing
6 Check to make sure that the fl ow rate and water
pressure from the water supply line meet the
minimum specifi cations for the brewer.
6 Check to make sure that the spray head is clean and
free of debris. Clean or replace as needed. Also make
sure that the spray head is correctly aligned and that
the tubing is routed properly to allow for maximum
fl ow (no kinks).
No Water/Tea Flows From Brewer During Brewing
6 Make sure that water supply is turned on.
6 Check to see if the water in the tank is level with the
watr tank probe? If no, see Water Tank Does Not Fill.
Water Level Error Message
To reset the unit and return to normal operation, turn
the toggle switch on the back of the brewer to the OFF
position for 5 seconds, then back ON.
6 Check to make sure that the fl ow rate from the
water supply line meets the minimum fl ow rate
specifi cations for the brewer. Also check the water
pressure.
42
User manual Curtis G4 GEMX IntelliFresh