Curtis IntelliFresh G4 GEMX User Manual page 41

Water Not Hot Enough
6 If the water heats, but is not hot enough, fi rst check
for the correct temperature setting on the control
panel. Reprogram as necessary.
Dispenser Overfl ows During Brewing
6 Make sure the dispenser is empty before starting the
brew cycle. If not, empty it before brewing.
No Power - Display Not Lit
6 On brewers with a power plug, make sure it is
connected to the power receptacle.
6 Make sure that the main power toggle switch on the
back panel is turned ON.
Water Tank Does Not Fill
• No water or low water in the tank can
cause the tank to overheat, resulting in the
thermostat reset switch opening. If after
correcting a tank fi ll problem there is no
power to the control panel, push the reset
switch button to reset.
6 Check to make sure the water supply is turned on.
Check for a clogged water supply line, water fi lter or
plugged inlet valve.
6
6
6
6
User manual Curtis G4 GEMX IntelliFresh
Troubleshooting guide | Troubleshooting Guidelines
IMPORTANT
Programming guide
 p age 28
41