Programming Mode; Programming Guide - Curtis IntelliFresh G4 GEMX User Manual

4.4.1

Programming mode

6 Tap the white Curtis logo on the touchscreen fi ve
(5) times to enter programming mode (see diagram
above).
6 The Acess Code screen will appear. The default pass
code is 1 2 3 4. The main menu screen will appear.
Once the code is entered, press OK. The access code
can be reset in the control settings sub-menu, under
passwords
6 The main menu screen contains a series of
sub-menu icons. The icons vary based on the model
selected under the Model Select sub-menu. For
the brewer to operate properly, the model selected
must match the model series on the brewer model
number label affi xed to the outside of the machine.
4.4.2

Programming guide

Shown blow are the various programmin options
available in the programming main menu. The icons
that appear vary based on the brewer model selected
under model select.
User manual Curtis G4 GEMX IntelliFresh
Software | Touchscreen Control Module
27