Schumacher SL1314 Owner's Manual page 8

Smart Cable LED and Alarm Behavior
BEHAVIOR
Green Ready LED blinking;
Red Fault and Clamp Reverse
LEDs off; no beep.
Green Ready LED solid; Red
Fault and Clamp Reverse LEDs
off; no beep.
Red Fault and Clamp Reverse
LEDs solid, Green Ready LED
off; rapid beeping.
No LED illuminated; no beep.
Red Fault LED solid, Green
Ready and Red Reverse
Clamp LEDs off; rapid beeping.
Red Fault and Green Ready
LEDs solid; Red Clamp
Reverse LED off; beeps once
per second.
NOTE: When the condition is corrected, the smart cable will automatically reset.
11. SPECIFICATIONS
Internal battery type .......................................... Lithium ion polymer
Capacity .............................................................................. 29.6 Wh
USB output .............................................................5V DC, 2.1A / 1A
Jump start ................................................600A peak/300A cranking
Charging Temperature................................ 32 ° to113 ° F (0 ° to 45 ° C)
12. REPLACEMENT PARTS
Battery clamps/smart cable ............................................ 94500932Z
Micro USB-USB charging cable ................................. 3899003781Z
13. BEFORE RETURNING FOR REPAIRS
For REPAIRS OR RETURNS, visit 365rma.com
Visit schumacherelectric.com for Replacement Parts.
14. LIMITED WARRANTY
For information on our one year limited warranty, please visit
schumacherelectric.com or call 1-800-621-5485 to request a
copy.
Go to schumacherelectric.com to register your product online.
Schumacher ® is a registered trademark of Schumacher Electric Corporation.
Cable is connected to jump starter only.
Cable is connected correctly to both
battery and jump starter.
Reverse polarity protection
Battery exhausted or poor connection
Short circuit protection
Temperature protection
• 8 •
REASON