Programming The Playing Order Of The Tracks; Random Play - JVC FS-MD9000J Instructions Manual

You can place an 8 cm (3'') CD without an adaptor.
If the CD cannot be read correctly (because it is scratched, for
example), " 0 0:00" appears on the display.
You can insert a CD while listening to the other source.
Basics of Using the
CD Player-Normal Play
To Play a CD ————————————
1. Insert a CD.
2. Press the CD 38 button.
The first track of the CD begins playing.
Track number
• The track number that has been played disappears from the
music calender.
• The CD Player automatically stops when the last track of the
CD has finished playing.
To stop playing the CD, press the
The following information for the CD is displayed.
Total track number
To stop playing and remove the CD, press the CD
open the CD holder.
38
To pause, press the CD
button. The playback time blinks on
the display.
To cancel pause, press the same button again. Play continues
from the point where it was paused.
To Select a Track or Passage within
a Track ——————————————
4
During playback, press the
want.
The selected track starts playing.
‡ 3UHVVýWKHý ýEXWWRQýRQFHýWRýVNLSýWRýWKHýEHJLQQLQJýRIýWKHý
¢
QH[WýWUDFNï
‡ 3UHVVýWKHý ýEXWWRQýWRýVNLSýWRýWKHýEHJLQQLQJýRIýWKHýWUDFNýEHð
4
LQJýSOD\HGïý3UHVVýWZLFHýTXLFNO\ýWRýVNLSýWRýWKHýEHJLQQLQJýRIý
WKHýSUHYLRXVýWUDFNï
Search Play ————————————
4 ¢
Holding down the or button, during playback, will fast for-
ward/backwards the CD so you can quickly find a particular pas-
sage in the track you are listening to.
Programming the
Playing Order of the Tracks
You can program the playing order of the tracks using the Remote
Control.
You can program up to 20 tracks in any desired order including
the same tracks.
You can only make a program when the CD Player is stopped.
1. Insert a CD.
2. Press the CD 38 button.
3. Press the 7 button to stop the CD.
4. Press the PROGRAM button.
The System enters the programming mode and the "CD PRO-
GRAM" indicator lights up.
10
Playback time
7
button.
Total playback time
0
button to
¢
or button to select the track you
PROGRAM
5. Press the UP, DOWN, >, or < button to
select the track to program.
UP button: Increases the track number by 1.
DOWN button: Decreases the track number by 1.
> button: Increases the tenth digit of the track number.
< button: Decreases the tenth digit of the track number.
• Example: for track 2, press the UP button twice. For track 12,
press the > button, then press the UP button twice (or simply
press the UP button 12 times).
6. Press the SET button.
UP
SET
DOWN
Total playback time of the programmed tracks
7. Repeat steps 5 and 6 to select the other
tracks for the program.
You can see the total playback time of programmed tracks on
the display. Also, you can see the programmed tracks on the
music calender.
38
8. Press the CD button.
The System plays the tracks in the order you have programmed
them.
You can skip to a particular program track by pressing the
¢
or button during Program Play.
7
To stop playing, press the
To confirm the programmed tracks while the CD player is
4 ¢
stopped, press the
or
program will successively be displayed in the programmed order.
To delete all the tracks in the program, press the
peatedly until all the tracks are cleared. Turning off the power or
0
pressing the CD button to open the CD holder will also clear the
programmed tracks.
To exit the program mode once, while the CD Player is
stopped, press the PROGRAM button to light off the "CD PRO-
GRAM" indicator.
Notes:
• If the total playback time of the programmed tracks exceeds 99
minutes 59 seconds, the total playback time will go out on the
display.
• When the CD contains more than 21 tracks:
When you try to program a track number exceeding 20 (for
example the 25th track), the total playback time indication will
go out, though programming is possible.
To Modify the Program ———————
Modify the contents of the program while the CD Player is stopped.
7
Each time you press the button, the last track in the program is de-
leted. To add new tracks to the end of the program, repeat above
steps 5 to 7.

Random Play

The tracks will play in no special order when you use this mode.
1. Press the RANDOM button on the Remote
Control.
The "CD RANDOM" indicator lights up on the display.
Program order number
(After 2 seconds)
4
button once.
button; the tracks making up the
7
button re-