Using The Timers - JVC FS-MD9000J Instructions Manual

Ultra compact component system
Table of Contents

Advertisement

Using the Timers

REMOTE CONTROL RM-RXFSMD9000
DIMMER
SLEEP
POWER
SLEEP
CLOCK
FM MODE TAPE/AUX
AHB.
AUTO
SUPER PRO
PRESET
PROGRAM
RANDOM
REPEAT
BASS
TREBLE
CANCEL
EDIT
DISPLAY
/TITLE
/CHARA
UP
<
>
SET
DOWN
TUNER
MD
CD
BAND
When the System is in use, the display shows other items as well.
VOLUME
For simplicity, we show here only the items described in this section.
The timers let you control listening and recording functions auto-
matically.
Setting the Clock
When you plug the AC power cord into the wall outlet, the time
indication blinks on the display.
You can set the clock whether the System is on or off.
Note:
The clock must be correctly set for the timers to work.
The procedure must be completed within two minutes. Other-
wise, the setting is cleared and must be repeated from the
beginning.
DOWN
MULTI CONTROL
CLOCK
(for 2 seconds)
1. Press the CLOCK button on the Unit for
more than two seconds.
The time indication rapidly blinks on the display.
4
2. Press the
¢
or
the time.
¢
Pressing the
button moves the time forwards and pressing
4
the
button moves it backwards. Hold down the button to
move the time in 10-minute intervals.
3. Press the CLOCK button.
The selected time is set and the seconds start counting from 0.
CAUTION: If there is a power failure, the clock
loses its setting after about 20 minutes.
"AM12:00" blinks on the display and the clock
must be reset.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at the
same time every day. It can be cancelled and re-activate whenever
you wish.
The Timer indicator on the display shows when the Daily Timer you
have set is in effect.
Note: Perform each setting within 30 seconds. Otherwise, setting
is cleared and the procedure must be repeated from the be-
ginning.
1. Press the POWER button to turn on the Sys-
tem.
2. Setting the ON time (Example: PM12:15).
20
AHB.
PRESET
SUPER PRO
TUNING
DOWN
MULTI CONTROL
UP
POWER
TAPE
MD
TUNER
/AUX
BAND
CD SYNCHRO
REC
VOLUME
REC
PAUSE
DOWN
UP
UP
CLOCK
button on the Unit to set
4
¢
CLOCK
ON time, OFF time, Source, Volume
TIMER/
SNOOZE
CLOCK
TIMER/
SNOOZE
OPEN/CLOSE
CD
CD
EJECT
MD
Timer
indicator
1. Press the TIMER/SNOOZE button on the Unit.
The Timer indicator lights up and the current ON time
blinks on the display.
¢
2. Press the
want the Unit to come on.
¢
Pressing the
4
ing the
button moves it backwards. Hold down the but-
ton to move the time in 10-minute intervals.
3. Setting the OFF time (Example: PM1:15).
1. Press the TIMER/SNOOZE button on the Unit.
The current OFF time blinks on the display.
¢
2. Press the
want the Unit to be turned off.
¢
Pressing the
4
ing the
button moves it backwards. Hold down the but-
ton to move the time in 10-minute intervals.
4. Selecting the music source.
1. Press the TIMER/SNOOZE button on the Unit.
The "TUNER" blinks on the display.
¢
2. Press the
want to listen to.
The display changes as shown below.
Ô
TUNER
TUNER REC
ginning)
When you select the "TUNER REC", the "REC" indicator
appears on the display.
5. Setting the volume level.
1. Press the TIMER/SNOOZE button on the Unit.
The current volume setting blinks on the display.
¢
2. Press the
--
: The current volume level will be used.
0 to 50: When the timer is turned on, the Volume will be
automatically set to the selected level.
SNOOZE indicator
4
or
button on the Unit to set the time you
button moves the time forwards and press-
4
or
button on the Unit to set the time you
button moves the time forwards and press-
4
or
button to select the music source you
Ô
Ô
Ô
CD
MD
(back to the be-
4
or
button to select the volume level.
SLEEP
indicator

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-md9000

Table of Contents