To Unload A Cd; Basics Of Using The Cd Player - Normal Play; Programming The Playing Order Of The Tracks - JVC VS-DT6 Instructions Manual

CAUTIONS:
• DO NOT try to open or close the Panel by
hands as it will be damaged. Press the
OPEN/CLOSE button on the Remote Con-
trol to open or close the Panel.
• DO NOT try to insert another CD when a CD
has been already loaded on the Unit. Doing
so will damage the CDs and the Unit.
• DO NOT apply any shock to the Panel when
it is open.
• DO NOT clean the Panel when it is open.

To Unload a CD

Press the 0 button on the Unit to eject a CD. The CD is
ejected automatically, then take out the CD.
SOURCE PRESET VOL
COMPACT COMPONENT SYSTEM
(when the Unit is placed
vertically)
Basics of Using the CD Player
— Normal Play
To Play a CD
1
Insert a CD.
Press the 3¥8 button.
2
The first track of the CD begins playing.
Track number
• The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD, press the 7 button.
The following information for the CD is displayed.
Total track number
To stop playing and remove the CD, press the 0 but-
ton on the Unit.
To pause, press the 3¥8 button. The playback time blinks
on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.
(when the Unit is placed
horizontally)
SYSTEM COMPONENT COMPACT
SOURCE PRESET VOL
Playback time
Total playback time
To Select a Track or Passage within a Track
In the stop mode or during playback, press the Number but-
ton on the Remote Control to select the track you want.
• The selected track starts playing.
• For the track number more than 10, press the +10
button then the Number button.
During playback, press the 4 or ¢ button to select the
track you want.
• The selected track starts playing.
• Press the ¢ button once to skip to the beginning of
the next track.
• Press the 4 button to skip to the beginning of the
track being played. Press twice quickly to skip to the
beginning of the previous track.
Search Play
Holding down the 4 or ¢ button, during playback, will
fast forward/backwards the CD so you can quickly find a
particular passage in the track you are listening to.
• The < or > and or
4
operate same as the
Programming the Playing Order
of the Tracks
(Using the Remote Control)
You can program the playing order of the tracks.
I You can program up to 32 tracks in any desired order in-
cluding the same tracks.
I You can only make a program when the CD Player is
stopped.
1
Insert a CD.
Press the 3/8 button.
2
Press the 7 button to stop the CD.
3
4
Press the PLAY MODE button on the
Remote Control until the "PROGRAM"
indicator lights up.
PLAY MODE
(To be continued on the next page)
Using the CD Player
OR
buttons on the Remote Control
¢
or button does.
PROGRAM
17