Installing The Canopy; Installing The Blades - Hunter Builder Plus Installation Manual

1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the hardware bag.
Repeat x5
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

hardware bag into the
Hanging Fan
Insert the two canopy screws
found in the
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Wiring Canopy
hardware bag.
Canopy Screw
Canopy Screw
bag
Blade Screw
bag
Grommet
bag
Note:
Fan style may vary.
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
Blade Arm Screw
Repeat x5
Note:
Fan style may vary.
Blades Light
x2
x15
x15
x10
Glass/Bulbs