Table of Contents
Advertisement
Error messages
Display message
Ask phone
company for
VM access #
Main unit
no power
or
No link. Re-
connect base
AC adaptor.
Busy
Check tel line
Checking
Error!!
Memory full
For assistance, please visit http://shop.panasonic.com/support
Cause/solution
R You have not stored the voicemail access number.
Store the number (page 55).
R Confirm the base unit's AC adaptor is connected to
the unit and the power outlet correctly.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit's AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset's registration may have been canceled.
Re-register the handset (page 45).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
R The automated call block function is in operation. Try
again later.
R One of the units is screening for telemarketing call.
Try again later.
R One of the units is recording a conversation with
outside caller. Try again later.
R The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 11).
R The automated call block function is in operation. Try
again later.
R Recording was too short. Try again.
R Although the unit tried to pair with the headphone,
the pairing has been failed.
– Make sure that the headphone is not connected to
other Bluetooth devices.
– The headphone is turned off or the battery is low.
Turn it on or fully charge the headphone.
– The Bluetooth headphone is out of range. Move
closer and try again.
– The Bluetooth headphone is in the cradle. Lift the
headphone.
– The same headphone is already paired.
R The recording memory is full. Erase unwanted
recordings (page 50).
Useful Information
59
Advertisement
Table of Contents
