Table of Contents
Advertisement
Useful Information
Making/answering calls, intercom
Problem
is displayed.
Noise is heard, sound cuts in
and out.
The handset or base unit does
not ring.
I cannot make a call.
I cannot answer an incoming
call using voice commands.
The unit answers an incoming
call on its own.
I cannot make long distance
calls.
I cannot use voice paging.
For assistance, please visit http://shop.panasonic.com/support
62
KX-TGD890_892_(en-us)_0713_ver310.pdf 62
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit's AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 45).
R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The ringer volume is turned off. Adjust the ringer volume
(page 21, 38).
R Silent mode is turned on. Turn it off (page 43).
R The ringer volume is turned off by pressing and holding
0 (
). Press and hold 0 (
(page 22).
R The dialing mode may be set incorrectly. Change the
setting (page 16).
R The answer by voice command feature is turned off. To
turn it on, see page 25.
R Baby monitor is set to "On". Turn off the baby monitor
feature (page 44).
R This situation might happen due to a false detection of
ambient noise (dog barking, TV sound, etc.). Move the
unit further away from the noise sources.
R If you are using other telephone that has Talking Caller ID
feature turned on, it may also trigger false detection. Turn
the Talking Caller ID feature off on the other telephone.
R To minimize false detection, decrease the sensitivity level
of the answer by voice command (page 25, 40).
R Make sure that you have long distance service.
R You cannot use voice paging if other units are in use.
) again to turn it on
7/14/2022 10:42:31 AM
Advertisement
Table of Contents
