For More Accurate Editing - JVC GR-DVM50 Instructions Manual

60
EN
Program 1
I N OUT
1 – – – – : – – ~
2 ~
3 ~
4 ~
5 ~
6 ~
7 ~
8 ~
TIME CODE – – : – –
TOTAL 0 0 : 0 0
Random Assemble
Editing Menu
TV
Remote sensor
T W
USING THE REMOTE CONTROL UNIT
MODE
4
Power Switch
VCR
(Recording deck)
RM-V713U
(provided)
R.A.EDIT
ON/OFF

For More Accurate Editing

Some VCRs make the transition from Record-Standby to
Record mode faster than others. Even if you begin editing
for the camcorder and the VCR at exactly the same time,
you may lose scenes you wanted, or find that you have
recorded scenes you did not want. For a cleanly edited
tape, confirm and adjust the timing of the camcorder
against your VCR.
DIAGNOSING VCR'S AGAINST
CAMCORDER TIMING
1
PREPARE FOR R.A. EDIT
Play back the tape in the camcorder, then point the
remote control at the camcorder's remote sensor and
press R.A. EDIT ON/OFF.
•"Random Assemble Editing Menu" appears.
2
CHOOSE A SCENE
Perform Random Assemble Editing on Program 1
only. In order to check VCR and camcorder timing,
select the beginning of a scene transition as your Edit-
In point.
3
PLAY BACK DUBBED SCENE
•If any images from the scene prior to the transition
you chose for your Edit-In point were recorded, that
means your VCR moves quickly from Record-Pause
to Record mode.
•If the scene you tried to dub starts in progress, the
VCR is slow to start recording.
(cont.)