Stop Button [5] - JVC GR-DVM50 Instructions Manual

START/STOP
Button
Pause (6) Button
Rewind (2)
Button
Stop (5) Button
I N OUT MODE
1 0 0 : 2 5 ~ 0 2 : 0 5 P – –
W
H
2 0 7 : 1 8 ~ 0 8 : 3 1 – –
P
3 – – 0 3 : 3 3 ~ 0 5 : 5 3
B/W
4 0 9 : 3 0 ~ 1 3 : 1 5
5 1 5 : 5 5 ~ 1 6 : 2 0 – – – –
6 – – – – : – – ~
7 ~
8 ~
TIME CODE 1 6 : 3 0 4
TOTAL 9 : 3 9
Remote Sensor
RM-V713U
T
(provided)
FADE/WIPE
EFFECT
EDIT IN/OUT
CANCEL
Random Assemble
Editing Menu
W
PAUSE
R.A. EDIT
ON/OFF
VCR REC
STBY
AUTOMATIC EDITING TO VCR
11
PREPARE SOURCE TAPE
Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE (6).
12
ENGAGE VCR'S RECORD-PAUSE MODE
Point the remote control towards the VCR's remote
sensor and press VCR REC STBY (q6), or manually
engage the VCR's Record-Pause mode.
13
START EDITING
Press START/STOP on the camcorder. Editing
proceeds as programed, right through to the end of
the last registered scene.
•Pressing START/STOP on the remote control does
not start editing.
•When dubbing is complete, the camcorder enters
the Pause mode, and the recording deck enters its
Record-Standby mode.
•If you do not register an Edit-Out point, the tape will
be dubbed all the way to the end automatically.
14
STOP EDITING
Engage the Stop modes for the camcorder and the
VCR.
To make the R.A. Edit counter display disappear, press
R.A. EDIT ON/OFF on the remote control.
NOTES:
Pressing R.A. EDIT ON/OFF on the remote control
clears all settings registered during Random Assemble
Editing.
When the editing cable is connected to the Pause
terminal during dubbing, make sure the remote control
is pointed at the VCR's sensor, and that the path between
the two is unobstructed.
Random Assemble Editing may not function properly
when using a tape including several duplicated Time
Codes ( pg. 21).
59
EN
1