White Balance Adjustment - JVC GR-DVM50 Instructions Manual

40
EN
A M
Operation Switch
MENU/SET Dial
Display
FOCUS AUTO
EXPOSURE AUTO
W. BALANCE AUTO
FADER OFF
/ WIPE
P. AE OFF
/ EFFECT
TO MODE MENU 0
4
END
FOCUS AUTO
EXPOSURE AUTO
4
W. BALANCE AUTO
FADER OFF
/ WIPE
P. AE OFF
/ EFFECT
TO MODE MENU 0
END
W . BAL .
AUTO
Lock Button
Power lamp
Power Switch
Recording Menu
White Balance
Adjustment
RECORDING

White Balance Adjustment

A term that refers to the correctness of color reproduction
under various lighting. If the white balance is correct, all
other colors will be accurately reproduced.
The white balance is usually adjusted automatically.
However, the more advanced camcorder operator would
prefer to control this function manually and achieve a
more professional color/tint reproduction.
1
SELECT OPERATION MODE
Set the Operation Switch to "
Power Switch to "
down the Lock Button. Pull out the viewfinder fully or
open the LCD monitor fully.
2
ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS "W.BALANCE"
Rotate MENU/SET to move the highlight bar to
"W.BALANCE", then press it.
4
ACCESS WHITE BALANCE ADJUST-
MENT
The Recording Menu disappears. "W.BAL." appears
in the upper left corner and the currently selected
mode indication is also displayed.
5
SET FUNCTION PARAMETERS
Cycle through the available settings of the selected
functions by rotating MENU/SET, and stop when the
one you want is displayed.
"AUTO" – The white balance is adjusted automati-
cally. This is the factory preset position.
" " – When shooting with the white balance
already having been set on the subject
( pg. 41).
" " – When shooting outdoors on a sunny day.
" " – When shooting outdoors on a cloudy day.
" " – When using a video light or other similar
type of lighting.
6
CLOSE WHITE BALANCE ADJUSTMENT
Press MENU/SET again. Selection is complete. The
indication "W.BAL." changes to "MANUAL".
To Return To Automatic White Balance . . .
.... select "AUTO" in step 5. Or, set the Operation Switch
to " ".
NOTE:
White balance cannot be used when Sepia or Monotone
( pg. 35) is activated.
Advanced Features (cont.)
". Then, set the
" or "5S" while pressing