JVC GR-DVM50 Instructions Manual page 43

Play/Pause (4/6) Button
Rewind (2)
Button
Stop (5) Button
Lock Button
Power lamp
Power Switch
FEATURE:
PURPOSE:
Fast-Forward
To pause during playback.
(3) Button
OPERATION:
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
NOTES:
FEATURE:
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press 3 to forward or press 2 to reverse during
2) To resume normal playback, press 4/6.
NOTES:
FEATURE:
Available only with the RM-V713U remote control
(provided) (
FEATURE:
Available only with the RM-V713U remote control
(provided) (
FEATURE:
Available only with the RM-V713U remote control
(provided) (
FEATURE:
Available only with the RM-V713U remote control
(provided) (
Still Playback
If still playback continues for more than about 3
minutes, the camcorder's Stop mode is automati-
cally engaged. After 5 minutes in the Stop mode,
the camcorder's power is automatically turned off.
When 4 / 6 is pressed, the image may not pause
immediately so that the camcorder can stabilize the
still image. During this time, if PAUSE (6) on the
remote control is pressed, Slow-Motion Playback
will start. This is not a malfunction.
Shuttle Search
playback.
During playback, press and hold 2 or 3 . The
search continues as long as you hold the button.
Once you release it, normal playback resumes.
A slight mosaic effect appears on screen during
Shuttle Search. This is not a malfunction.
Slow-Motion Playback
pg. 54).
Frame-By-Frame Playback
pg. 54).
Playback Zoom
pg. 54).
Playback Special Effects
pg. 55).
43
EN