ADC HiGain HXU-358 Manual page 59

LTPH-TP-1044-01, Issue 1
Figure 32 shows a sample screen for a monitor type external test.
Main Monitor
Test Access on the specified port has been initiated
ID: | Card 'A'
To complete an external test head access test, external test
equipment is required. Connect the equipment to the test port
(labeled TEST IN and OUT on the front of the HXU-358).
Additionally, you can connect test equipment to the wirewrap
pins located on the backplane of the Wideband 3190 or ACE.
HXU-358 V1.04
History Config Test
+--------------------+
| T1/E1 Loopback
| DS3 Loopback
| Test Head Access
| +----------------------------+
+-| Internal Test Head Access
|
+--------------------------------------------------------------+
| Port number: 1
| Test Status: Active on Port 1
|
|
|
+--------------------------------------------------------------+
03/30/01 10:59:53
Figure 32. Monitor Type External Test
April 6, 2001
Inventory Quit
|
|
|
External Test Head Access
Direction: CUSTOMER
Line Format: B8ZS
CONNECT DISCONNECT
Help
|
|
Type: MONITOR
ALARMS: NONE
Testing
|
|
|
|
|
49