Radio Mode Operations
FM reception
For enhanced FM performance the
tuner includes signal actuated stereo control and
multipath noise reduction circuits.
Listening to the radio
1. Press the [ SRC ] button and select the radio
mode. then the radio will be on.
2. To select a preset band, press the [ BND ] but-
ton, then select one of the preset bands such
as FM1, FM2, FM3 or AM. Every time the [ BND ]
button is pressed, the display will change as:
F1 F2
F3
AM
3. Press the [
] or [
desired station.
Manual tuning
1. Press the [ BND ] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the [ BND ] button for 1 second
or longer, then the "MANU" is lit in the display,
which means that a manual selection function
is on.
3. Press the [
] or [
in a station.
Seek tuning
1. Press the [ BND ] button to select the desired
band FM1, FM2, FM3 or AM.
2. If the "MANU" is lit in the display, press and
hold the [ BND ] button for 1 second or longer.
When the "MANU" display is off, the seek tun-
ing is now available.
3. Press the [
] or [
seek in a station.
Preset memory function
Preset memory function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3 and
AM.
12
DB255
F1...
] button to tune in the
] button to manually tune
] button to automatically
Manual memory function
1. Press the [ BND ] button, to select a band you
want to store in the memory.
2. Press the [
] or [
desired station.
3. Press and hold one of the [ DIRECT ] button for
2 seconds or longer to store the current sta-
tion into preset memory.
Auto store function
( Automatic Station Store )
1. Press [ BND ] button to select the desired band
FM1, FM2, FM3 or AM.
2. Press and hold the [
or longer. The stations at which the reception
is the strongest will be automatically stored in
the memory.
Notes:
• When the auto store is performed, the station pre-
viously store in the memory at that position is over-
written.
• When the number of stations stored is less than
six, the previous content of the memory for each
direct button will be retained.
Preset scanning
( Preset Station Scan )
When the [
] button is pressed, the "SCN" will
be indicated with preset memory numbers and the
stations are tuned in for 7 seconds each in the
order in which they were stored. Press the [
button again to cancel the preset scanning mode.
Instant station recall ( ISR )
With this function, a specific radio station can be
recalled from any mode.
ISR memory
1. Press the [ SRC ] button, then select the radio
mode.
2. Select the radio station which you want to store
in the memory.
3. Press and hold the [ ISR ] button for 2 seconds
or longer.
Recalling ISR
Press the [ ISR ] button and the display will show
"ISR". Then the radio station previously memo-
rized will be selected. Press the [ ISR ] button again
to disengage the unit from the Recalling ISR func-
tion.
] button to tune into a
] button for 1 second
]