Assembling The Section St 2/C-H, St 2/R-H, St 2/R-V On Leg Sets - Bosch rexroth SE 2/C Series Assembly Instructions Manual

Please note:
The requirement for
smooth running of the
conveyor medium and the
workpiece pallet is:
• Glide profi les and guide
profi le are cut and
deburred at right angles.
• All transitions of the
guide profi le are provided
with a chamfer.
• At the start and the end
of the section, the guide
profi le protrudes by 5 mm
in each case in order to
bridge the adapter plates
for mounting of the drive
unit or return unit.
7.6.2

Assembling the section ST 2/C-H, ST 2/R-H, ST 2/R-V on leg sets

ST2/C-H
0,3
ST2/C-H
0,3
+1
3
Fig. 12: Assembling the section ST 2/C-H, ST 2/R-H, ST 2/R-V on leg sets (1/2)
ST2/R-H
L
ST2/R-H
L
+4°
15°
3 842 358 737/2022-08, MIT: SE 2/C-..., SE 2/R-..., Bosch Rexroth AG
Assembly 27/108
ST2/R-V
0,3
ST2/R-V
0,3
358 736-22