Table of Contents
Advertisement
8/120
Safety instructions
Bosch Rexroth AG, MIT: VarioFlow plus, 3 842 549 802/2016-04
2 Safety instructions
2.1 About this section
This product has been manufactured to be state-of-the-art. Nevertheless, there is a
risk of personal injury and property damage if you do not take note of this section
and follow the safety instructions in this document.
Read this manual carefully and completely before you start working with the product.
Keep these instructions accessible to all users at all times.
Always include them when giving the product to a third party.
2.2 Intended use
The product is an incomplete machine.
It may be used as follows:
• for installation in a Rexroth VarioFlow plus transfer system
• Maximum load / section load: see Technical Data on page 119.
• Environmental conditions see page 119.
The product is strictly intended for professional use and not for private use.
The intended use also implies that you have read all this documentation and fully
understood it, in particular chapter 2 "Safety Instructions".
2.3 Improper use
Any use other than that described as intended use is considered to be improper, and
therefore not permitted.
Bosch Rexroth AG is not liable for any loss or damage resulting from improper use.
The user alone bears any risks associated with improper use.
The following foreseeable abnormal uses are also considered improper use:
• Transporting goods other than those specifi ed.
• The transporting of people on the product or the transported material.
• Persons climbing onto the product – the product must not be walked on or
climbed onto.
• Private use.
2.4 Personnel qualifi cations
The activities described in this document require a basic knowledge of mechanical,
electrical and pneumatic systems, as well as familiarity with the corresponding
technical terms. Additional knowledge of using lifting gear and the associated slings
is required for transporting and handling the product. To ensure safe use, these
activities should therefore only be performed by a properly qualifi ed operative, or by
an instructed person acting under the direction of such a person.
"Qualifi ed operative" means someone who can recognize possible hazards and take
the appropriate safety measures due to his professional training, his knowledge
and experience, and his knowledge of the relevant regulations. A qualifi ed operative
must comply with the relevant specifi c professional rules and have the necessary
expertise.
Advertisement
Table of Contents
