Bosch rexroth SE 2/C Series Assembly Instructions Manual page 28

28/108 Assembly
Please note:
The requirement for
smooth running of the
conveyor medium and the
workpiece pallet is:
• Glide profi les and guide
profi le are cut and
deburred at right angles.
• All transitions of the
guide profi le are provided
with a chamfer.
• At the start and the end
of the section, the guide
profi le protrudes by 5 mm
in each case in order to
bridge the adapter plates
for mounting of the drive
unit or return unit.
Please note:
• With the previous section
profi les, the glide profi les
are disassembled and
assembled for repair at
the front.
• With the new section
profi les, the glide
profi les are disassembled
and assembled from
above without fi rst
disassembling the
return unit/drive head.
• For differences
between profi les,
see page 19 / 95.
Bosch Rexroth AG, MIT: SE 2/C-..., SE 2/R-..., 3 842 358 737/2022-08
ST 2/C-H, ST 2/R-H, ST 2/R-V, previous section profi le
ST2/C-H
0,3
ST2/C-H
0,3
+1
3
Fig. 13: Section ST 2/C-H, ST 2/R-H, ST 2/R-V, previous section profi le
ST2/R-H
L
ST2/R-H
L
+4°
15°
ST2/R-V
0,3
ST2/R-V
0,3
358 736-22