Selecting The Fish Finder Port - Interphase 50-200 User Manual

STC (allows reducing or eliminating the surface clutter)
Interference Rejection (allows reducing interference from other boats/
Fish Finders)
Noise Filter
Fish Symbol feature (*)
Automatic Transducer Setup. Recognition for
trasducer identification and parameters setup for best performance)
Alarms Handling (Shallow Alarm, Depth Alarm, Fish alarm, Tempera-
ture Upper, Temperature Lower)
NOTE* On specific software version available.
1.2

SELECTING THE FISH FINDER PORT

If the Fish Finder is connected to the Port 2 (see Par. 4.7), follow the procedure:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "Port 2 In-
put" + [ENTER] + "BBFF 50/200" + [ENTER]
10
devices (automatic
User Manual