Frequently Asked Questions - Interphase 50-200 User Manual

6

. Frequently Asked Questions

6.1 How can I disconnect the cables from the 50-200 FISH
FINDER in case I need to do so for the installation?
Open the 50-200 FISH FINDER box unscrewing the four screws (see
the following figure).
Once the screws are removed, pull out the panel and the Printed Circuit
Board (PCB). Unscrew the cables from the PCB.
Wire the cables as needed.
Reconnect the cables to the PCB (see the Fig. 4.5 for reference).
Push the panel towards the case (be sure to have well positioned the
rubber gasket). Close the 50-200 FISH FINDER box screwing the four
screws.
User Manual
Fig. 6.1 - The 50-200 FISH FINDER (I)
Fig. 6.1a - The 50-200 FISH FINDER (II)
33