Kohler C3-430 Installation Manual page 7

Connect the Water and Power Supply
IMPORTANT! First water, then power.
IMPORTANT! Risk of product damage. Carefully align the thread of inlet
pipe with that of the bidet seat. Do not break the threads or overtighten the
jiont. To fix the joint, tighten it with your hands and twist it a 1/4 turn with a
tool.
 Directly connect the tee joint with the bidet seat and the inlet pipe.
Attention! For newly installed piping systems, before connecting the inlet
 Use the hose provided to connec the tee joint and the bidet set.
Attention! It is required to use the new hose assembly attached with the
 Tighten all connectors.
 Openthe water supply system.
Attention! Be sure to thoroughly rinse the waer supply pipe to remove
3
Kohler Co.
hose to the tee joint, the system must directly drain water for
several seconds to remove sand and dirt from the pipeline.
appliance. Do not re-use the old one.
impurities from the pipeline. Use drinkable tap water as the
water source. Do not use industrial water, wastewater, sew-
age or sea water.
1
2
7 1349981-X2-A