Kohler C3-430 Installation Manual page 3

Note:
• Risk of product damage. Do not install the product at a place with exces-
sive humidity, where moisture may condense at the surface of the product.
Please maintain that the usage environment is under adequate ventilation,
so as to prevent damage to electronic components.
• Risk of product damage or property loss. Water leakage may happen if
the water pipe connector is pulled or pressed with excessive force.
• Risk of product damage. The product may be damaged if the the nozzle
is applied with excessive force.
• Risk of product damage. Make sure jthe seat is positioned correctly so
that it can be connected to the thread of the inlet pipe. Otherwise, the inlet
pipe thread may wear off and lead to water leakage.
• Min water pressure 0.07 Mpa (dynamic pressure)
Max water pressure 0.74 Mpa.
• Connect only to a cold water supply line carrying direct tap water.
• Unplug the seat and drain completely, if the seat is not being used for an
extended period of time.
• When install the product in the room, a stop valve shall be installed in a
close proximity. For emergency circumstances, the water inlet valve shall
be stopped without using any tools; otherwise unexpected failure may
cause the loss to the customer.
Kohler Co. 3 1349981-X2-A