Visual Operations; Cd Changer Operations - Clarion VRX746VD Owner's Manual & Installation Manual

VISUAL Operations

This function is available when a VTR, etc. is
connected to the visual terminal.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching to the VISUAL mode
Note:
• For your safety, the VRX746VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.
1. Press the [FUNC] buton and select the
VISUAL mode.
Changing the audio input level
The visual terminal can be used to change the
input audio level.
∗ The factory default setting is "HIGH".
1. Touch the screen to display the menu, then
touch the [SUB] key.
2. Touch the [VISUAL AUX SENS] key to select
the level.
HIGH: 16.25 dB
MID: 3.75 dB
LOW: 0 dB
3. Touch the [ESC] key to return to previous
screen.
44
VRX746VD

CD Changer Operations

Note:
• When an optional DVD (CD) changer is
connected through the CeNET cable, this unit
controls all DVD (CD) changer functions. This unit
can control a total of 2 changers (CD and/or
DVD).
CD changer functions
Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [FUNC] button to
select the CD changer for play.
∗ If "NO MAGAZINE" appears in the display, insert
the magazine into the CD changer. "DISC
CHECKING" appears in the display while the
player loads (checks) the magazine.
∗ If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
s s s s ] button or touch the [s
1. Press the [s
key to pause play. "PAUSE" appears in the
display.
2. To resume play, press the [s
s s s ] key again. s
touch the [s
Switching the CD TEXT titles
This operation is only possible when this unit is
connected with a CD TEXT compatible CD
changer.
You can select the CD TEXT titles among the
disc titles, track titles and artist titles.
When the panel is closed:
1. Press the [DISP] button to show the SUB
display. The disc title, track title or artist titles,
user title is displayed.
2. Each time you press and hold the [DISP]
button for 1 second or longer, the display
toggles among the disc title, the track title or
the artist titles, user title.
The selected title scrolls once.
∗ When panel is open, titles will not be
displayed on the information panel.
s s ] s s
s ] button or s s
s