Inside Cleaning - Intermec PK80 Series User Manual

—
Chapter 3 Maintenance

Inside Cleaning

28
Let the printer cool before you clean the inside of the printer, or you
may burn your fingers.
Open the printer cover and inspect the ribbon cartridge and all visible
moving parts on the printer mechanism for signs of wear or damage.
2
1
This illustration shows the visible moving parts of the printer mechanism.
Use a low-pressure, dry air source, such as "canned air" available at elec-
tronic supply houses and typewriter repair facilities, or a vacuum, to re-
move accumulated paper dust from the printer mechanism.
The printer ribbon contains a special lubricant to ensure that the fine dot
wires inside the print head receive adequate lubrication. Replace the rib-
bon frequently to prolong the life of the print head. The printer requires
no additional user-applied lubrication. Ribbon cartridges, available in
black or purple, are sold separately. See "Inside Sales" in Chapter 1 for or-
dering information and part numbers.
1 Head gap adjuster
2 Ribbon cartridge
3 Paper bail
4 Thumb wheel (green)
5 Pinfeed holder
PK80 Series 80-Column User's Manual
3
4
5