Using The Easylan Ftp Server; Timeout; User Access Control - Intermec EasyCoder PF2i User Manual

Chapter 5 — Basic Operations (Fingerprint and IPL)

Using the EasyLAN FTP Server

Th e EasyLAN has a built-in FTP server, which allows you to upload and
download fi les such as pictures and fonts. You can also print by sending
a fi le of printer commands directly to the printer's command interpreter
("net1:" in Fingerprint) by storing the fi le as pr1 on the FTP server. Th e
printer then executes the commands, and performs the print job.
Th e EasyLAN FTP server supports most of the common FTP
functionalities and clients. To connect to the server use the assigned IP-
address and standard FTP port (21).

Timeout

For security reasons the printers internal FTP server has an idle time
limit to ensure that a connection is not left active. Th e timer will close
the FTP connection after 15 minutes of idle time.

User Access Control

Th ere are two default accounts on the printer: admin and user. By
default, the user account is permitted to send fi les to the printer port,
create directories and fi les on the server. Th e admin account has the
same permissions as the user account but as admin you can also change
Network settings, LAN settings and upgrade the printer's software.
Note: When you log in as admin on the FTP server, the
current user in Fingerprint or IPL is not automatically
changed.
For more information about accounts, see "Restrict Functionality" on
page 86.
58 EasyLAN User's Guide