Ddns - Intermec EasyCoder PF2i User Manual

To change SNMP settings
Enter information in the entry fi elds.
1 Click Add to add trap settings. You can enable up to four
authentication failure traps.
2 After you add a trap, it appears in the Trap Address Settings list. To
edit or delete a trap, click the Edit/Delete button for that trap in
the list, and then click Edit to change settings for that trap, or click
Delete to delete the trap.
3 Click Submit SNMP Settings to send the changes to the printer. For
more information on SNMP settings, see the next table.
SNMP Settings
Setting
Read Community
Read/Write
Community
System Name
Authentifi cation
Failure Trap
Trap Address
Settings

DDNS

To use DDNS, BIND 9 or a compatible name server is recommended.
As a security mechanism, DDNS uses the symmetric transaction
authentication method TSIG. TSIG uses the current UTC time to sign
messages. If the time is incorrect, the name server rejects updates.
Th e only record types supported by DDNS are A (host-to-address) and
PTR (address-to-host).
EasyLAN User's Guide
Chapter 4 — Using the EasyLAN Web Browser Interface
Description
Community with rights to read the SNMP MIBs.
Community with rights to read and write SNMP MIBs.
Administrative name for the SNMP node.
Defi nes if a trap is sent when an unauthorized SNMP request
(for example, a request from an unauthorized community) tries
to access the printer. Choose Enable to send the trap.
Click Add... to specify trap address settings:
• Trap Address: IP address to the receiver of SNMP traps.
You can specify up to four trap addresses.
• Trap Port: Port to which SNMP traps are sent. Th e default
is 162.
• Trap Community: Defi nes the community to which SNMP
traps will be sent.
• Friendly Name: User-specifi ed string identifying the trap.
• Trap Enable Status: Defi nes if the specifi ed trap is enabled.
45