Changing User - Intermec EasyCoder PF2i Installation Instructions Manual

Changing User

To change the current user in Fingerprint, the "su"command is used.
Syntax:
RUN"su [-p <password>] <user>"
su requests the password for <user>, and switches to that user after
checking the password file.
Valid <user> names are admin and user.
Everyone can become user even if user's password is set.
No password is requested if the current user already is the one to switch
to.
The option is as follows:
-p password
Note: Everything is case sensitive (user name, su command,
passwords).
Examples:
To become "admin".
RUN"su admin"
Password:[enter password (default: pass)]
Ok
Or:
RUN"su -p pass admin": RUN"whoami"
admin
To switch back to user:
RUN"su user"
EasyLAN Wireless Interface Kit Installation Instructions
Do not query for a password; use the one supplied at
the command line.
Chapter  — Setup in Fingerprint