Setting Network Parameters With Printset 4 - Intermec EasyCoder PD41 Instructions Manual

Setting Network Parameters with
PrintSet 4
PrintSet 4 is a PC-based software application that lets you
configure your Intermec printer from your computer. The
program is available on the PrinterCompanion CD, and can also
be downloaded from the Intermec web site.
PrintSet 4 requires that your PC is running Microsoft Windows
2000 or XP.
To set network parameters with PrintSet 4
1 Use an RS-232 serial cable to connect the printer to your PC.
2 Install and run PrintSet 4.
3 Select File > Add printer. The Add Printer Wizard opens.
4 Click Next.
5 Select Serial Connection. Click Next.
6 Select your COM port, and make sure the Automatically
detect communication parameters box is checked. Click
Next.
PrintSet starts the Autoconnect procedure, and the progress is
displayed on the Status bar.
7 When the Add Printer Wizard has found your printer, click
Next.
8 Click Finish. The printer has now been added to the list
under "My Printers".
9 Select the printer, and then double-click the Network option
located in the right pane.
You can now set the network parameters according to your
preferences.
EasyLAN Ethernet Software Instructions 7