Declaration Of Conformity - Intermec EasyCoder F2 Installation Instructions Manual

Chapter 1 Description
1
/. Intermec assumes no responsibility as regards fulfi lling the CE Directive if the printer is han-
dled, modifi ed or installed in other manners than those described in Intermec's manuals.
4
RFID 13.56 MHz Interface Board for EasyCoder F2 and F4 Printers – Installation Instructions

DECLARATION OF CONFORMITY

Intermec Printer AB
Idrottsvägen 10
S-431 22 Mölndal
declare under our sole responsibility
EasyCoder F2/F4 RFID 13.56 MHz
to which this declaration relates
is in conformity with the following standards
ETSI EN 300 330-1 (2000-07 Draft)
ETSI EN 300 330-2 (2000-07 Draft)
SP Swedish National Testing and Resarch Institute
Box 857, S-501 15 BORÅS
ETSI EN 310 489-3:
EN 55 022:1994, class B conducted
EN 61 000-3-2:1995
EN 61 000-3-3:1995
ETSI EN 310 489-3:
EN 61 000-4-2:1995
EN 61 000-4-3:1995
EN 61 000-4-4:1995
EN 61 000-4-5:1995
EN 61 000-4-6:1995
EN 61 000-4-11:1995
Electrical Safety:
following the provisions of Directives
95/5/EEC, 89/336/EEC, and 73/23/EEC
Mölndal 2001-04-01
...................................................................
We,
Box 123
Sweden
1
, that the product
RTTE/EMC:
Id mark 0402
Emission:
Immunity:
EN 60 950
Mats Cremon
President