Draytek Vigor2762 Series Quick Start Manual page 9

Off
Interface Description
WLAN
WLAN On - Press the button and release it within 2 seconds. When
ON/OFF/WPS
the wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn
off the WLAN function. When the wireless function is not ready, the
LED will be off.
WPS - When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client's device making
network connection through WPS.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.
DSL
Connector for accessing the Internet.
Phone2/Phone1 Connector of analog phone for VoIP communication.
(for "V" model)
I / O
Power Switch.
PWR Connector for a power adapter.
The LAN port is disconnected.
3