Table of Contents
Advertisement
User License
The Model Expansions are linked to the user license of the user who
downloaded them.
You cannot import or install Model Expansions with different user
licenses on a single JUNO-X.
User A
A
EXZ001
When you want to import or install a Vocal Designer Model Expansion
that has a different user license from the Model Expansions already
registered in the JUNO-X, follow the steps to initialize the user license.
A
Initializing Your User License
By initializing the user license, you can install a Vocal Designer Model
Expansion that you've downloaded with a new user license.
NOTE
¹ This deletes all Model Expansions that are already installed.
¹ Never turn off the power or remove the USB flash drive while the
"Executing... " message is shown.
1 .
Press the [MENU] (WRITE) button on the JUNO-X.
Use the [ Ç SELECT É ] knob to select "UTILITY", and
2 .
press the [ENTER] (INIT) button.
Use the [ Ç SELECT É ] knob to select "FACTORY
3 .
RESET", and then press the [ENTER] (INIT) button.
The FACTORY RESET screen appears.
Select the item using the [ Ç SELECT É ] knob, and
4 .
using the [ENTER] (INIT) button to select or deselect
the items, select only the "Remove License" check
box.
User A
User B
A
B
EXZ005
A
User A
User B
A
B
EXZ005
EXZ005
Initialize
Using the Vocal Designer Model Expansion
* If you have not imported or installed a Sound Pack, Wave Expansion
EXZ005
or Model Expansion, the "Remove License" check box is not shown.
* If you select the other check boxes besides the "Remove License"
check box and execute this operation, this initializes all of the
corresponding data.
Ø "Returning to the Factory Settings (Factory Reset)" (Startup
Guide)
Press the [ Ë ] button.
5 .
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
6 .
To execute, use the [- VALUE +] knob to select "OK",
and then press the [ENTER] (INIT) button.
"Completed. Turn off power" is shown on the display.
7 .
Turn the JUNO-X off.
This initializes the user license.
8 .
Follow the steps in "Installing the Vocal Designer
Model Expansion" (p. 4) to install the
Vocal Designer Model Expansion on the JUNO-X.
Error Messages
Indication
USB Memory Not Ready!
Expansion File Not Found!
Incorrect File!
Incorrect License! Please
Remove License
Expansion Memory Full!
It has already been installed
Action
The USB flash drive cannot be recognized. Make sure that
your USB flash drive is correctly inserted into the JUNO-X.
This is shown when there is no Expansion file in the USB
flash drive.
Make sure that the file has been correctly saved and that
the file extension is ".exz".
This is shown when the selected file is not supported by
the JUNO-X, or when the file is corrupted.
Check which instruments support the original download,
and try downloading again.
This is shown when the Vocal Designer Model Expansion
is currently linked to a different user license.
To install, provide a file that uses the same user license
as the Expansion already installed, or initialize the user
license.
This is shown when there is not enough free memory to
install an Expansion.
In this case, you can uninstall Model Expansions that are
already installed to free up memory.
This is shown when the Vocal Designer Model Expansion
has already been installed.
You don't need to reinstall.
5
Advertisement
Table of Contents
