User Sample; User Sample List - Roland V-Drums TD-27 Data List

USER SAMPLE

Audio files that you created on your computer can be imported from an SD card into the TD-27, and played as instruments (User Sample function).
You can edit the sound of a user sample or apply effects to it in the same way as other instruments.

USER SAMPLE LIST

Here's how to view a list of all user samples that have been imported. You can audition the sound, specify looping, and edit the name.
Parameter
[F1] button (LIST tab)
Play Type
Gain
[F3] button (DELETE)
[F4] button (NAME)
[F2] button (START/END tab)
Zoom
Start *1
End *1
*1: You can't set the end point earlier than the start point.
You can't set the start point and end point to the same value.
For both the start point and end point, you can't specify a value that exceeds the length of the user sample.
Value
Specifies how the user sample is sounded.
ONESHOT MONO
ONESHOT POLY
LOOP ALT
-12–+12 [dB]
Deletes the currently selected user sample.
Renames the currently selected user sample.
Reference
For details on how to assign a name, refer to "Renaming a Drum Kit" in "Reference Manual" (PDF).
–
0–07937742
257–07937999
Explanation
When you strike the pad, the currently-heard sound is silenced before the new sound is heard.
Notes do not overlap.
When you strike the pad repeatedly, the sounds of the notes are heard overlapping.
The user sample plays repeatedly (loop).
Each time you strike the pad, the sound alternately plays or stops.
Volume of user samples
Zooms the waveform display in or out.
MEMO
You can zoom-in/out on the horizontal axis by holding down the [ENTER] button and pressing the
cursor [ ] [ ] buttons.
You can zoom-in/out on the vertical axis by holding down the [ENTER] button and pressing the
cursor [ ] [ ] buttons.
Adjusts the start point (the location at which the user sample starts playing).
Adjusts the end point (the location at which the user sample stops playing).
23