Setting Up The Driver; Loading Windows 2000 Pen Drivers - Intermec 6640 Technical Reference

Toolkit for the Computer

Setting Up the Driver

Some of the drivers may have additional setup instructions. You will need to re-
boot the computer after completing these driver loads, to have these components
work on the computer.
Go to the page listed with each component to continue toolkit instructions for
that component:
"
"
"
"
"
"
"
"
"

Loading Windows 2000 Pen Drivers

" NOTE:
The Windows 2000 Pen Drivers are factory-installed on the default load. Install the Windows
2000 Pen Drivers from the toolkit only if you need to reinstall.
You will be prompted to select a location for these drivers via the Choose
Destination Location screen (page 4-5). The default location is
"C:\Utilities\Pen2k."
A message appears advising you to read information about installing the pen
drivers. Click OK to display the contents of the README.TXT file via the
Notepad application. If the paragraphs do not wrap, select Edit " Word Wrap.
Close the Notepad application and click Finish via the Installation Completed
screen (page 4-5) to return to the desktop.
Go to page 5-1 to reinstall the Windows 2000 Pen drivers, beginning with
uninstalling the existing drivers.
4-6 6640/6650 Windows 2000 Technical Reference
Windows 2000 Pen Drivers
General Utilities
Intermec 802.11 Windows 2000 Drivers
Ashtech G8 GPS Radio
GSM Motorola D10 Radio
Mobitex Rim 902 Radio
Proxim LAN Radio
Sierra Wireless Inc — SB300
Create Recovery Diskettes
4-6
4-7
4-7
4-8
4-11
4-13
4-13
4-14
4-17
SECTION 4