Setting The Time And Date - Intermec JG2010 User Manual

JANUS 2010 Hand-Held Computer User's Manual

Setting the Time and Date

Next, you set the current time and date.
To set the time and date
1. Type this command at the DOS prompt and press
2. Type the current time in the format HH:MM:SS and then press
3. Type this command at the DOS prompt and press
4. Type the current date in the format MM-DD-YY and then press
1-10
(4MB)nugg
time
To type a colon on an alphanumeric keypad, press
on a large numeric keypad, press
date
To type a dash on an alphanumeric keypad, press
a large numeric keypad, press
Press to type the dashes. Then press
CODEhel
nuggCODE
.
.
.
:
.
. To type a colon
:
.
. To type a dash on