Clarion DXZ558RMP Owner's Manual page 27

Digital Radio / DAB Operations
Switching programmes
1. Press the [SRC] button to receive a DAB
station.
2. Press the [a, d] lever upward or
downward to switch programmes in the DAB
station.
Note:
• The programme name may be the same
depending on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [SRC] button to receive a DAB
station.
2. Perform the following operation depending
on the connected model.
Press the [ ] button. "SERVICE SC" lights
up and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [ ] button.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [SRC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1
second or longer to select any one shown
above.
3. Press the [a, d] lever upward or
downward to select a desired programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1. Press the [SRC] button to select the DAB
mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] [M2] [M3]
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
• Press and hold the [DIRECT] button for 2
seconds or longer to store the programme
currently being received. (Manual memory)
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
Setting the INFO standby mode
If you press and hold the [TA] button for 1
second or longer, "INFO" lights in the display
and the main unit is set into the INFO standby
mode until the selected announcement is
broadcast. When the selected announcement
broadcast starts, the announcement item
appears in the display. If you press and hold the
[TA] button for 1 second or longer while the
selected announcement broadcast is being
received, the selected announcement broadcast
reception is cancelled and the main unit goes
into the INFO standby mode.
Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
1. Perform the following operation depending
on the connected model.
Press and hold the [ADJ] button for 1
second or longer to switch to the RDS
adjustment selection display.
[M1]...
29
DXZ558RMP