Water Purification - Kohler K-77780KR-0 Homeowner's Manual

□ During UV sterilization process, if there's customer open lid and use toilet, or press STOP button on remote, UV sterilization function
will be terminated.
□ For setting of automatic UV function .
Manual UV sterilization
●
□ When unseated, press "one button sterilization" button on remote, activate UV sterilization function (details refer to remote user's manual).
□ During UV sterilization process, if there's customer open lid and use toilet, or press STOP button on remote, UV sterilization function will
be terminated.
* UV sterilization (refers to the ultraviolet sterilization generated by UV lamp): During UV working cycle, the bacteria on nozzle surface will be eliminated by irradiation. The antibacterial rate
is more than 99%. (Measured after one UV working cycle, it was measured within 18mm×8mm irradiation area. Perform test in accordance with GB /T 23131 requirements, UV radiation
zone was shown in the diagram, UV working cycle activation mode refers to users guide. Testing lab: China household electrical appliances testing institute.)
Sterilized water*
1. Electrolyzed water performs nozzle sterilization function.
□ After a user leaves the toilet under the mode of Front, Rear or Spiral, the toilet will activate the function of sterilization by sterilized
water.
Perform electrolyzed water spray function inside the bowl.
□ After customer used up and leave toilet, it will auto activate electrolyzed water spray function after flushing the toilet.
3.
□
* Sterilized water (refers to refers to the tap water containing hypochlorite generated by chlorine ions after ionization): Sterilized water generated during electrolysis working cycle eliminates
bacteria on the nozzle surface. The antibacterial rate is more than 96%. (Perform test in accordance with GB /T 23131 when the content of chlorine ions in tap water is >24ppm. Different
water quality might cause different sterilization effect. Electrolysis working cycle activation method refers to operation description. Testing lab: China household electrical appliances
testing institute.).
Automatic energy saving function
When energy saving is activated, product shall auto detect idle duration and decrease ring temperature to
●
achieve energy saving purpose.
For details of automatic energy
●

Water purification

1. Water used for rear/spiral/front wash has been purified.
i. When filter cartridge is almost due, the orange LED keeps ON (as shown).
ii. The filter cartridge is expired, the orange LED flashing.
iii. Improper filter cartridge installation, the orange and white LED flashing in turn.
iiii. Refer to page 15 for exchange filter cartridge.
Deodorizing/Air Purification
1. . Auto activates air purification function when deodorizing function is activated.
2. Press "
"on remote to activate air purification function.
* Air purification indicates the positive and negative ions are deodorized by the positive and negative ions generation device.
1308458-KR01-B
saving.
13 Kohler Co.