Table of Contents
Advertisement
8. OPERATIONS
Basic Operations
CAUTION
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up,
when you switch the power back on, the sud-
den loud volume may hurt your hearing and
damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FNC] button for 1 second
or longer to turn off the power for the unit.
Selecting a mode
1. Press the [FNC] button to change the opera-
tion mode.
2. Each time you press the [FNC] button, the
operation mode changes in the following or-
der:
Radio mode
CD mode
Note:
• If the CD mode is selected when no disc is in-
serted, the display shows "NO DISC".
Adjusting the volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise de-
creases the volume.
The volume level is from 0 (minimum) to 33
(maximum).
10
DB345MP
Note:Be sure to read this chapter referring to the front diagrams of
chapter "2. CONTROLS" on page 3.
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone ef-
fects stored in memory. Select the one you prefer.
Each time you press the [Z-ENCR] button, the
tone effect changes in the following order:
"Z-ENHANCER 1"
ENHANCER 3"
ENHANCER 1"...
• Z-ENHANCER 1 : bass emphasized
• Z-ENHANCER 2 : treble emphasized
• Z-ENHANCER 3 : bass and treble empha-
• Z-EHCR OFF
Audio Mode Adjustments
Press the [A-M] button to select the adjustment
mode. The mode switches as follows each time
the [A-M] button is pressed:
BASS
mode
Radio mode...
The factory default setting is "Z-EHCR OFF".
"Z-ENHANCER 2"
"Z-EHCR OFF"
sized
: no sound effect
TREB
BAL
The display returns to the previous mode 7 sec-
onds after the adjustment.
"Z-
"Z-
FAD
Previous
Hide quick links:
Advertisement
Table of Contents
