Cd Mode Operations - Clarion BD269RGMP Owner's Manual

RDS Operations
Adjusting AF
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
∗ The factory default setting is "ON".
1. Press the [TA] button for 1 second or longer
and press [å]/[∂] button to select "AF
ON" or "AF OFF".
2. Turning the [ROTARY] knob clockwise to "AF
ON"; turning it counterclockwise to "AF
OFF".
∗ If the reception of the current broadcast
station deteriorates, "SEARCH" appears in the
display and the radio searches for the same
programme on another frequency.
Adjusting REG
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
∗ The factory default setting is "OFF".
1. Press the [TA] button for 1 second or longer
and press [å]/[∂] button to select "REG
ON" or "REG OFF".
2. Turning the [ROTARY] knob clockwise to
"REG ON"; turning it counterclockwise to
"REG OFF".
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
"ALARM" appears in the display and the
emergency broadcast can be heard.
GCancelling an emergency broadcast
If you press the [TA] button, emergency
broadcast reception is cancelled.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is "15".
During a TA, ALARM or PTY interrupt, turn the
[ROTARY] knob clockwise or counterclockwise
to set the volume to the desired level (0 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the
interrupt.

CD Mode Operations

Loading a CD
Insert a CD into the center of the CD insertion
slot with the labeled side facing up. "LOADING"
appears in the display, the CD enters into the
slot and start playing.
Notes:
• Do not put your hand, fingers, or foreign objects
into the CD insertion slot.
• If a CD has already been loaded, another CD
cannot be inserted. Do not insert another one
forcefully.
• Discs not bearing the
played with the unit. CD-ROMs cannot be played.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Listening to the disc already
inserted
Press the [SRC] button to select the CD/MP3
mode, the CD will start playing.
Stopping (Pausing) playback
While the CD playing, pressing the [
will stop the CD and "PAUSE" indicate.
Press the [ ] button again to resume
playback.
Ejecting the CD
Press the [Q] button, then the CD will be
ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded
after 15 seconds.
Top function
Press the [BND] button, then the CD will start
playing from the first song (track number 1).
∗ For MP3 mode, it will start playing from the first
song of current folder.
DB268RMP/BD269RMP/BD269RGMP
mark cannot be
] button
17