Loading Discs, Selecting Discs, Exchanging Discs During Play - Insignia IS-HTIB102732 User Manual

Loading Discs
You can load at maximum 5 discs in the unit for playing.
1. Press to open discs loading tray.
2. Load disc (DVD, CD, MP3 Disc or Picture CD) on disc tray with label side facing upward.
3. Press DISC SKIP to change to next disc tray.
4. Repeat steps 2-3 for loading discs until at maximum 5 discs are loaded.
5. Press to close discs loading tray. The disc will start to play automatically. There may be a short delay
before playing when the player is reading the disc menu.
Selecting Discs
During play, press DISC SKIP on the main unit panel or the DVD button on the remote control. This will rotate
the next disc on the tray into the play position. Once rotated, the disc menu will be read and play will
commence.
OR
Press on the main unit panel the 1, 2, 3, 4 or 5 button to directly select the desired disc to play. The disc
selected will rotate to the play position and load the disc menu. Play will commence after the menu is loaded.
The disc button number will light to show which disc is currently in the play position.
Exchanging Discs during Play
During play of a disc, you may exchange the remaining 4 discs without interruption.
1. During play, press EXCHANGE to open discs loading tray.
2. You may exchange 2 discs at a time. To exchange the remaining 2 discs, press DISC SKIP .
3. Press EXCHANGE or
Warning:
• Never rotate the discs loading tray manually for discs exchange/loading to avoid damage to the unit.
• Do not attempt to load the currently playing disc. Otherwise it may cause malfunction of the unit.
In case the unit does not function properly or a disc is stuck inside the tray, please switch the unit off, unplug
the power cord and wait for 2 minutes. The player will resume normal operation after switched on.
to close discs loading tray.
GB 25