InFocus LP580 User Manual page 14

Setting up the LitePro 580
Connecting an IBM-compatible desktop computer
1. Plug the LCD connector on the VGA cable into the projector's
2. Unplug the monitor cable from the computer's graphic port.
3. Plug the monitor cable that you just removed into the MONITOR
4. Plug the VGA connector on the VGA cable into the computer's
5. Tighten the thumb screws on all the connectors to ensure proper
6. Turn on the projector, monitor, and computer.
10
Computer port.
connector on the VGA cable.
graphics port.
grounding.
VGA Cable
LitePro 580 User's Guide