InFocus LP580 User Manual page 54

4. Fit the new lamp in place.
5. Replace the lamp cover.
LitePro 580 User's Guide
Do not drop the lamp module or touch the glass
bulb! The glass can shatter and cause injury.
• Align the lamp in the correct direction.
• Lightly press on it until it touches bottom.
• Tighten the two screws.
• Reposition the cover in place.
• Replace the screws and tighten them.
Never operate the LitePro with the lamp cover open
or removed. This disrupts the airflow and causes the
LitePro to overheat.
Maintenance
51