InFocus LP580 User Manual page 16

Setting up the LitePro 580
Connecting an IBM-compatible laptop computer
1. Plug the LCD connector on the VGA cable into the projector's
2. Plug the VGA connector on the VGA cable into the laptop's
3. Tighten the thumb screws on the connectors to ensure proper
4. Turn on the projector and the laptop.
5. If necessary, activate the external display port. (Refer to the
12
Computer port.
graphics port.
grounding.
appendix of this manual for a list of activation commands.)
Many laptop computers do not automatically turn on
their external video port when a secondary display
device such as the LitePro is connected. Refer to your
computer manual for the command that activates
the external video port. Activation commands for
some laptop computers are listed in the Appendix on
page 67.
VGA Cable
LitePro 580 User's Guide