InFocus LP580 User Manual page 48

To type a macro:
1. Click the button you want to program. (You can also press Enter
2. Enter the keystrokes you want to assign to the button, up to 32
LitePro 580 User's Guide
on an IBM-compatible computer or Select on a Macintosh to
select a button to program.)
• The text box at the top of the window displays the keystrokes
that are already assigned to the button.
keystrokes. For alphanumeric (character) keys, simply type the
key. If you want to include non-character keys in your macro, fol-
low the guidelines below for either IBM-compatible computers or
Macintosh computers.
To include non-character keys on IBM-compatible computers:
• Type the code enclosed in brackets. Click the Key Help button
to display a list of the non-character key codes.
• If two control keys are to be pressed at the same time, put
brackets around the entire combination. For example, if
Control and Alt are to be pressed at the same time, type
[[CTRL][ALT]].
• To assign mouse clicks to a button: select the button to be
programmed, select "Mouse Button" from the Special menu,
then choose the desired mouse click. You can also type the
code for the mouse click in the text box next to the button. The
codes are listed here:
Mouse button
Left Button Click
Left Button Double-Click
Left Button Down
Left Button Up
Left Button Drag On/Off
Right Button Click
Right Button Double-Click
Right Button Down
Right Button Up
Right Button Drag On/Off
Using LP Utilities
Code
[MLBC]
[MLBDC]
[MLBD]
[MLBU]
[MLBDG]
[MRBC]
[MRBDC]
[MRBD]
[MRBU]
[MRBDG]
45