Page 1
When you plug the USB cable into the USB connector on the computer, the Found New Hardware dialog box appears. NOTE The illustrations below refer to the LP130. The dialog boxes you see will refer to your projector model. Otherwise the procedure is the same. In the Found New Hardware Wizard, click Next.
Page 2
Select Search for a Suitable Driver, then click Next. Select Specify a Location, then click OK. NOTE If you stored the file on a floppy drive, do not select Floppy Disk Drives. Instead, click Specify a Location, then navigate to the floppy drive on your computer. USB Driver Installation for Windows XP...
Page 3
To specify a path, click Browse, then navigate to the location where you stored the file, then click When the wizard locates the .inf file, click OK. When the drivers are installed, click Finish. USB Driver Installation for Windows XP...
Page 4
You have completed the setup on the current laptop or desktop computer. You now have keyboard "Page Up" and Page Down" capabilities and mouse control through the remote. NOTE Windows 2000 installs the driver file in C:\WINNT\System32\drivers, and the .inf file in C:\WINNT\INF.