Icom IC-R20 Instruction Manual page 103

tWhen the driver is found, the following dialog is displayed.
Click [Next>] to start the installation.
y After the installation is completed, click [Finish].
• Rebooting the PC is recommended.
Click
Click
DRIVER INSTALLATION
■ COM port confirmation
After the driver installation, confirm the driver availability and
the port number are recommended.
In this section, screen shots of Windows XP are used for in-
struction example. However, the instructions are similar to an-
other operating systems, Windows 98, Me and 2000.
q Boot up the Windows.
w Select the "Control Panel" in the Start menu.
• Control panel appears as shown in the next step below.
e Click the "Performance and Maintenance."
• Performance and Maintenance menu appears.
rClick the "System," then click the "Hardware" tab in the dis-
played System Properties screen.
17
Click
17
90