Installation Procedure; Overall Connection Diagram; Å Installation Place Of The Main Unit - Icom FP-561 Instruction Manual

6-1 Overall connection
diagram
GPS antenna
Transom-
transducer
EX-1010
Through-hull type
transducer

6-2 Installation procedure

Å Installation place of the main unit
INSTALLATION PROCEDURE
Install the system properly according to the instruction of this manual to
ensure optimum performance and stable operation of the system
Prior to commencing installation work, make sure that the system package comes
complete with the accessories listed in the "Standard accessories" section on the
first page of the manual.
GPS ANT
TRANSDUCER
EX-1622
type
(Option)
(Option)
External navigator
FF-89, MR-61/610,
VP-21 or the like
Install the main unit of the system in such an area that
q Is situated forward of the steering wheel and is easy for the steersman to
observe the display of the unit;
w Is distant as far as possible from devices forming a magnetic field, such as a
loudspeaker and power transformer, or devices sensitive to a magnetic field,
such a magnetic compass and magnetic tape; and
e Is not exposed to rainwater, spray of water or direct sunlight.
GND
PWR
DGPS
NMEA
NMEA IN
NMEA OUT
(Option)
Ground
Battery
Red: +
11 to 30 VDC
RD-200
Differential GPS
receiver (Option)
6
Black: –
68