Route Navigation Setting; Setting Route Navigation; Changing The Monitor Range; Canceling Route Navigation - Icom FP-561 Instruction Manual

5
r PLOTTER MODE q ROUTE NAVIGATION SETTING

(5)-1 Setting route navigation

¡Navigation screen
NAV
SEL
CANC
CLR
Select "ROUTE" and press
the [SET] key.
¡Selecting a route No.
ROUTE
ROUTE 1
SEL
CANC
CLR
Select route No. and "GO" or
"RTN" voyage and press the
[SET] key.
¡Route navigation screen
5
DGPS 34ﾟ18.000N 135ﾟ01.000E
TO WP 1
0.19
RANGE 4
0°T 5.5KT

| Changing the monitor range

(5)-2 Canceling route
navigation
¡Navigation cancel screen
EXIT
THE NAVIGATION ?
CANC
CLR
Press the [SET] key to cancel
the current navigation.
27
Route navigation means that the ship is navigated via a number of registered
marks to the destination.
q Make sure that the navigation route has already been registered (
before commencing route navigation.
Failure to register the navigation route disables route navigation.
DESTINATN
* Registration of a new navigation route needs an existing route or destination, if
ROUTE
any, to be canceled in advance (see section (5)-2).
SET
SET
80.0FT
w Press the [NAV] key.
The navigation selection screen will appear.
e Select "Route" using the [UP] or [DOWN] key and press the [SET] key.
The Route No. field, Outward/Homeward selection field, and comment field will
appear at the bottom of the screen.
r Select "Route No." using the [UP] or [DOWN] key, select "GO" (Outward) or
"RTN" (Return; Homeward) voyage using the [LEFT] or [RIGHT] key, and then
1 GO
GO/RTN
press the [SET] key.
SET
SET
80.0FT
The route navigation screen will appear, at the bottom of which are displayed the
first destination No., the azimuth and distance to the destination, and the devia-
tion out of course.
* On the coastline screen, the section between the current ship mark and the fist
destination No. is depicted by a green solid line. A purple solid line is used to
show each section thereafter.
3
2
1
0
315°
NM
80.0
54.3°F
FT
The solid line indicating the first section of route navigation defaults to
green.
between the first and second destination Nos. (if you want to change the
color of the solid line for the second section from purple to green), proceed
as follows.
q On the coastline screen, press the [UP] or [DOWN] key to activate the cross hair
cursor.
w Using the [UP]/[DOWN] or [LEFT]/[RIGHT] key, move the cross hair cursor until
its intersection coincides with the mark of the second destination No.
e Press the [NAV] key.
The purple solid line for the second section will turn green.
To cancel route navigation, proceed as follows.
q On the coastline or combination screen, press the [NAV] key during route navi-
gation.
* Make sure that a mark along the route does not coincide with the cross hair cursor.
w A message indicating the current navigation is going to be canceled is displayed.
Press the [SET] key.
OK
SET
80.0FT
The current navigation will be canceled.
If you want to expand the monitor range to the second section
P. 20)