Icom IC-M1V Instruction Manual page 23

× Self check function
"SELF CHECK"
The self check function checks trans-
ceiver conditions by itself, and informs
you in case a problem is found. The fol-
lowing items are checked after the
power is turned ON, then, switches to
operation mode.
• PLL lock
(both transmit and receive)
• Temperature
• Connected battery voltage
• Water intrusion
Push
Self check
function ON
Push
Self check
function OFF
(default)
Scrolls the channel
comment, "
× Scrambler unit selection
"SCRAM UNIT"
This item appears only when a voice
scrambler unit is installed.
Selects installed voice scrambler unit.
Otherwise, the voice scrambler function
cannot be operated.
Push
Selects
UT-98
(default)
Push
Selects
UT-112
Scrolls the channel
".
comment, "
SET MODE
× Scrambler code
"SCRAM CODE"
There are 128 codes (00 to 127) avail-
able with UT-98, or 32 codes (01 to 32)
available with UT-112, for programming.
In order to understand one another, all
transceivers in your group must have
the same unit* and scramble code.
*Different scrambling systems are used be-
tween UT-98 and UT-112, therefore the
same scrambler unit must be used in your
group.
Scrambling
code 00
(default)
*01 min. when
UT-112 is
installed.
Scrambling
code 127*
*32 max. when
UT-112 is
installed.
Scrolls the channel
comment, "
".
8
".
19